1 channel relay module

• Maximum load: AC 250V/10A, DC 30V/10A
• Trigger current: 5mA
• Working voltage: 24V
• Module size: 50 x 26 x 18.5mm (L x W x H)
• Four mounting bolts holes, diameter 3.1mm
• DC+: positive power supply (VCC)
• DC-: negative power supply (GND)
• IN: can be high or low-level control relay
• NO: normally open relay interface
• COM: Common Interface Relays
• NC: normally closed relay interface

Electrical parameters:

Wiring:

 6 channel relay module

1. Maximum load on normally open pin: AC 250V/10A, DC 30V/10A.
2. Trigger current 5mA;
3. Power indicator light (green), relay status indicator light (red);

Module interface specifications:
1. DC +: DC power supply positive pole
2. DC -: DC power supply negative pole
3. CH1~CH6: relay signal triggering pin

Relay output:
1. Normally closed pin (NC1~NC6): relay normally closed pin
2. Common pin (COM1~COM6): relay common pin
3. Normally opened pin (NO1~NO6): relay normally opened pin

8 channel relay module

Features

Using high-current relay , AC250V 10A DC30V 10A

Contact some independent wiring, safe and reliable

Standard interface can be extended in a variety of development board

With fixed screw holes for easy installation

Suitable for a variety of platforms such as 51/AVR/AVR/ARM

   

Module Description :

1. the module complies with international safety standards, the load control area, and regional isolation tank ;

2. using double-sided FR-4 circuit board design, high-end chip production process.

3. using loose music authentic relay control 

4. with the relay instructions, pull off, disconnect does not shine ;

5. the signal input has a low signal, often beginning with a common terminal will be turned on ;

6. the relay can control the various devices and the load ;

7. 8 and 8 normally open normally closed contact ;

8.  blue KF301 terminals to the control line are more convenient.

9.  Module size : 138m * 56mm * 18.5mm ( L * W * H ) , Weight : 120g

10. with 4 fixing bolt holes, hole 3.1mm, pitch 131mm * 49.5mm

11. finished by 100% functional testing and stability testing.

Two module interface :

1, VCC: 24V power supply connected to the positive

2, GND: 0 v power supply connected to the negative

3, IN1-IN8: trigger signal, active low

Relay outputs: a 12- line interface, the interface can be directly connected to all leads, user-friendly

1, NO1 - NO8: normally open relay interfaces, relay before the vacant after the pull shorted with COM

2, COM1 - COM8 Relay Common Interface